Skip to content
Creative3DP Tools

Text to STL

A 3D text generator for printing. Type a name, pick a font, and download a name tag, keychain, sign, stencil or stamp.

Drag to rotate, scroll to zoom. Double-click to fit.

This model

Size
-
Volume
-
Filament (PLA, solid)
-
Triangles
-
Mesh check
-

Download

Press Enter for a second line.

Plate shape
Spacing and layout

What you can make

Each of these opens the generator with sensible sizes already set. Change the text and download.

MakeWhat it isStarts at
Name tagRaised letters on a rounded plate1.4 mm letters on a 2 mm plate
KeychainRaised letters with a ring hole2.4 mm plate, 4.5 mm hole
Door or desk signLetters sunk into a thick plate1.2 mm deep in a 3 mm plate
StencilLetters cut through a thin sheet1.2 mm sheet, stencil font
StampMirrored raised letters2 mm letters, mirrored
Loose lettersLetters on their own, no plate60 mm tall, 12 mm thick

How to turn text into a 3D model

  1. Type your text. A name, a word or a short phrase. Press Enter for a second line.
  2. Choose a font and a style. Raised and sunk text sit on a plate; "letters only" has none; cut-through makes a stencil.
  3. Set the sizes in millimetres. Letter size, how far the letters stand up, and how thick the plate is. The finished size is shown under the preview.
  4. Download the STL and open it in your slicer. Use 3MF if you want the colour and millimetre units kept.

The 18 fonts

All of them are open fonts that may be used for anything, including things you sell. You can also load any .ttf or .otf file of your own.

KindFonts
CleanOpen Sans Bold, Archivo Black, Oswald Bold, Bebas Neue, Anton
Rounded and funFredoka Bold, Righteous, Bangers
Serif and monoRoboto Slab Bold, Playfair Display Bold, Courier Prime Bold
Script and handwritingPacifico, Lobster, Dancing Script Bold, Caveat Bold, Permanent Marker
StencilBlack Ops One, Allerta Stencil

Bold, simple fonts print best. Thin strokes vanish below about 0.8 mm, so if a script font looks spindly, raise the letter size until its thinnest stroke is at least two nozzle widths wide.

Printing 3D text well

SettingTags, keychains, signsLoose letters
OrientationFlat, text facing upFlat on their back
Layer height0.12 to 0.2 mm0.2 mm
SupportsNoneNone
Infill100% (it is thin)10 to 15%
Two coloursFilament change at the plate heightNot needed

For a stamp, print the mirrored design in a flexible filament such as TPU so it takes ink evenly. For a stencil, a 1 to 1.2 mm sheet is stiff enough to hold flat and thin enough to paint through cleanly.

Want a picture instead of words? The image to STL converter turns a logo or photo into a relief. For parts described in code, with sliders for every size, try OpenSCAD online. If a file from somewhere else will not slice, the STL repair tool closes holes and fixes flipped faces.

Frequently asked questions

How do I convert text to an STL file?

Type the text in the box, choose a font and a style, and press Download STL. The model is built in your browser as you type, so the preview is the file you get. There is nothing to install and no account.

Can I use my own font?

Yes. Choose "Use your own font file" and pick a .ttf or .otf file from your computer. The font is read by your browser and is not uploaded. Check the font's licence if you plan to sell what you print.

What is the difference between raised, sunk and cut-through text?

Raised text stands up from a plate and is the easiest to print and read. Sunk text is pressed into the plate, which suits signs you want to fill with paint. Cut-through text removes the letters completely to make a stencil. "Letters only" gives the letters with no plate at all.

Why do the middles of letters fall out of my stencil?

In an ordinary font the middle of an O, A, B or R is an island with nothing holding it. A stencil font adds small bridges that keep those islands attached. Two are included here: Black Ops One and Allerta Stencil.

How thick should 3D printed letters be?

For raised text on a plate, 1 to 2 mm reads well and prints fast. For loose letters that stand on a shelf, 10 mm or more keeps them from tipping. Keep every stroke at least two nozzle widths wide, which is 0.8 mm with a standard 0.4 mm nozzle, so thin fonts need a larger letter size.

How do I print the text in a different colour from the plate?

With raised text, add a filament change in your slicer at the layer where the letters start, which is the plate thickness. With sunk text, change colour a few layers before the top instead. Both work on a single-nozzle printer.

Does it support accents and other alphabets?

It supports every character the chosen font contains. All the built-in fonts cover Western European accents. If a character is missing, a note appears naming it. For other scripts, use your own font file.

Is the STL watertight and ready to slice?

Yes. Overlapping letters are merged first, so script fonts come out as one solid instead of a stack of intersecting pieces, and the mesh is checked edge by edge before you download it. The result of that check is shown next to the preview.

Font credits

16 of the fonts are under the SIL Open Font Licence 1.1 and 2 are under the Apache Licence 2.0. The licence text for each is served beside it: Open Sans Bold, Archivo Black, Oswald Bold, Bebas Neue, Anton, Fredoka Bold, Righteous, Bangers, Roboto Slab Bold, Playfair Display Bold, Courier Prime Bold, Pacifico, Lobster, Dancing Script Bold, Caveat Bold, Permanent Marker, Black Ops One, Allerta Stencil.