What you can make
Each of these opens the generator with sizes that print and scan well. Change the details and download.
| Make | What it is | Starts at |
|---|---|---|
| WiFi sign | Guests scan to join, with "WiFi" above and a frame | 60 mm code, rounded squares |
| Keychain | A link on a tag with a ring lug | 30 mm code, 4.5 mm hole |
| Business card | Your contact details, saved in one scan | Flush two-colour, 40 mm |
| Coaster | Round, with a link to a menu or playlist | 60 mm code on a round plate |
| Table sign | "MENU" above, "Scan to order" below | 70 mm code, 3 mm plate |
| Stencil | Paint a code onto a wall, box or crate | 120 mm, cut through 1.2 mm |
| Stamp | Mirrored raised code for ink or clay | 35 mm, 2 mm tall |
How to 3D print a QR code
- Choose what the code opens. A link, a WiFi network, a contact card, plain text, an email, a phone number, a text message, a map location or a UPI payment.
- Choose a style. Raised squares on a plate are the simplest. Flush puts the code level with the top as a second body, for multi-colour printers. Sunk presses it in for paint. Cut through makes a stencil.
- Set the width. Watch "Smallest square" under the preview and keep it at 1.5 mm or more.
- Wait for the scan check, then download. The 3MF keeps the colours and the two bodies; the STL is one solid for any slicer.
The four styles
| Style | Best for | How to get contrast |
|---|---|---|
| Raised | Signs, keychains, any single-nozzle printer | Filament change at the plate height |
| Flush, two colours | Coasters, cards, anything touched a lot | Multi-colour printer, one filament per body |
| Sunk | Thick signs and plaques | Paint or wax in the recess |
| Cut through | Painting codes onto walls, boxes and crates | The paint itself |
Print settings that scan
| Setting | Value |
|---|---|
| Smallest square | 1.5 mm or more (0.8 mm is the floor with a 0.4 mm nozzle) |
| Code height or depth | 0.6 to 1 mm, three to five layers |
| Layer height | 0.12 to 0.2 mm |
| First layer | Tune out elephant foot, or the gaps between squares close up |
| Colours | Dark code on a light plate. White code on black also scans with most phones. |
| Supports | None. Print flat, code facing up. |
A matte or satin filament scans better than silk or glossy, which throws glare back at the camera. If a finished print will not read, try it under even light from the side and hold the phone a little further away.
What the scan check does
After each change, the page draws the exact shapes that go into the model, softens them the way a phone camera does, and runs a QR decoder on the result. "Reads correctly" means the decoded text matches what you typed. It cannot know how your printer handles small gaps, so the square size and print settings above still matter.
Want words instead of a code? The text to STL generator makes name tags, signs and stencils from any font. To turn a logo or photo into a relief, use the image to STL converter, and if a file from elsewhere will not slice, the STL repair tool fixes it.
Frequently asked questions
Do 3D printed QR codes actually scan?
Yes, as long as there is contrast between the code and the plate and each square is big enough. Two colours (black on white) scan best. A single colour can work when the light falls across the raised squares, but it is much less reliable. This page decodes every design from its real shapes before you download it and shows the result as "Scan check".
How big should a 3D printed QR code be?
Keep the smallest square at 1.5 mm or more with a 0.4 mm nozzle. A short web link makes a 25 × 25 grid, so 40 mm across is comfortable and 30 mm is about the smallest that prints cleanly. Longer content makes a bigger grid and needs a wider code. The smallest square size is shown beside the preview.
How do I print a QR code in two colours on a single-colour printer?
Choose the raised style and add a filament change (M600 or a pause) in your slicer at the plate thickness, shown under the preview. The plate prints in the first colour and the code in the second. With a multi-colour printer, choose the flush style and load the 3MF, which keeps the plate and the code as separate bodies.
How do I make a WiFi QR code for 3D printing?
Choose WiFi, type the network name and the password, and pick the security type. Phones join the network when they scan it, with no typing. The password is turned into the code inside your browser. It is not uploaded, and it is left out of the share link.
Which error correction level should I use?
Medium suits most prints. Low makes the smallest grid, which means bigger squares at the same width, so use it for small keychains. High recovers from up to 30% damage, which helps on coasters, outdoor signs and anything that gets scuffed, but it needs a larger code.
Why does my printed QR code not scan?
Usually one of four things: too little contrast between the code and the plate, squares too small for the nozzle so they merge, elephant foot or stringing filling the gaps, or a border that is too narrow. Print the code at least 0.6 mm tall in a contrasting colour, keep the smallest square at 1.5 mm or more, and leave a clear border of at least 2 squares.
Can I make a QR code stencil?
Yes. Choose "Cut through". Every square is cut as its own hole with plastic between them, and the three large corner squares get small bridges so their middles stay in place. Paint through it with a sponge. There is a guide on the QR code stencil page.
Can I add text, a frame or a key ring hole?
Yes. Add a line above and below the code in any of 18 fonts, a frame around the edge, a round or rectangular plate, and a lug with a ring hole. The text is scaled down when it is wider than the code.
"QR Code" is a registered trademark of DENSO WAVE INCORPORATED.